Pivotal-powersports Full Color Hi-Def LED Lighting Kit User Manual download pdf

Hi-Def Full Color LED Lighting Kit

Disconnect the vehicle’s battery and remove any body work that will have the LED light tubes located behind

them. Carefully mount the LED light tubes using double sided tape or plastic zip ties in the desired locations.

The box with the wires coming out of it is the control unit. Find a cool and dry place to mount the control unit,

making sure that the unit is away from any hot parts of the vehicle like the engine or exhaust, and not

exposed to water or rain.

Connect the red power wire from the control unit to

the positive side of the battery as shown in the

diagram to the left to the. Connect the black ground

wire to the negative side of the battery. The fuse

holder should be installed as close to the battery as

possible (making sure the fuse is removed until the

installation is complete.)

There is a separate black wire coming out of the

control unit, this is the remote control wire, and this

wire is not connected to anything. Do NOT connect this wire to any part of the battery or another wire. Also,

make sure that this wire is positioned as high as possible in the vehicle; this will increase the operating range

of the remote.

Once the control unit has been mounted and

connected to the battery, run the wires from the unit

to the individual tubes. It is recommended to run one

connection wire per tube. This makes expanding the k

much easier and insures full power to each light tube

eatly hide any loose wires making sure that the wires are not near any hot parts like the engine or exhaust.

inally, install the fuse and adjust the LED light tubes for maximum visibility on the vehicle, preferably in a

Remote Control Function

The included remote in the kit operate all functions of the LED lighting kit.

utton A – Cycles between all colors

erns

Using plastic zip ties will aid in this process. Reinstall any removed body work.

dark area like a closed garage. Then firmly secure them to the mounting area using double sided tape or

plastic zip ties. That is it, you are done! Enjoy your new LED Lighting Kit!

Pressing each button cycles the lights through its different colors, modes and

speeds. Press each button individually until the desired color / pattern /

speed appears.

Button B – Cycles between 5 flashing patt

Button C – Cycles between 5 flashing speeds

Button D – Turns the kit On and Off

Page 1

Hi-Def Full Color LED Lighting Kit Disconnect the vehicle’s battery and remove any body work that will have the LED light tubes located behind them

No comments

Pivotal-powersports Full Color Hi-Def LED Lighting Kit User Manual